Water well screen pipe | Sand Control Screen - Well Screen & Casing, Steel Pile pipe, Structural bending pipe

The water well screen is an important component of a well that allows water to flow into the well while preventing sediment and other debris from entering. The screen is typically located at the bottom of the well, near the aquifer. This is done to ensure that only clean water is collected and that any sediment or dirt is filtered out. The screen is typically made from a perforated pipe or other type of material that has small openings to allow water to pass through while blocking sediments from entering.

Abter well screen is manufactured with a continuous v-shaped slot to reduce the entrance velocity of water and encrustation rates. Besides, Filson well screen has a large surface area without clogging, thus provide superior filtration performance.

Well screen slot size selection is a critical step, typically based on the particle size analysis of the formation sample. With the standard slot size range from 0.005” to 0.5”, Filson well screen can control sand particles and silt from the well perfectly.

Advantages of Water Well Screens

1. The V-shape section plane of water well screens creates the continuous slot, which can avoid blockage and make sure of the unimpeded water.
2. The consecutive slot of water well screenshave wider open area, and it can reduce the speed of the water entering to avoid the sand entering the screen under the great pressure, so it can control sand better, which can increase the water yield and prolong service time of the well.
3. Wire and support rods are all-welded, which makes water well screens more robust and longer life.
4. The longitudinal support rods and the continuous slot make the water well screenshave more excellent pressure-resistant performance.
5. Specifications and end connections of water well screens can me fabricated according to customers’ requirements.

As one of the most professional water well screen , Stainless Steel Well Screen pipe suppliers, abter has more than 20 years of design and production experience. We will always be your business partner in well screen field, helping you select the best water well screen or design your personalized one.

Just give us your specific application, well conditions and formation properties, we can guarantee to customize the most suitable well screen for you.

Application

Widely used in mining, coal, petroleum, fertilizer, grain, salt, environmental protection and other industries. For sieving liquid, powder and other materials. In petroleum, chemical industry, metallurgy, mining, pharmaceutical purification and drilling liquid purification.

technical parameter

Size		ID		OD		Female thread OD
in	mm	in	mm	in	mm	in	mm
2	51	2	51	2 5/8	67	2 3/4	70
3	76	3	76	3 5/8	92	3 3/4	95
4	102	4	102	4 5/8	117	4 3/4	121
5	127	5	127	5 5/8	143	5 3/4	146
6	152	6	152	6 5/8	168	7	178
8	203	8	203	8 5/8	219	9 1/4	235
10	254	10	254	10 3/4	273	11 3/8	289
12	305	12	305	12 3/4	324	13 3/8	340
14	356	13 1/8	333	14	356	–	–
16	406	15	381	16	406	–	–
20	508	18 3/4	476	20	508	–	–

Slot Size (mm): or as per customers’ requirement
Material: carbon steel, stainless steel (304, 316L etc.)
Unit length up to 6m.
Diameter from 25mm to 1200mm
Open area up to 60%
End Connection: beveled or thread coupling

Note: Length of continuous slot well screen can up to 40 ft.

filter mode

1. Filter from the outside in

Factory floor

I.D: 15mm–1200mm

Slot: >0.01mm

Length: <6000mm

Factory floor

I.D: 150mm–1500mm

Slot: >0.1mm

Length: <3000mm

2. Filter from the inside out

Factory floor

I.D: 150mm–1500mm

Slot: >0.5mm

Length: <6000mm

Factory floor

I.D: 150mm–1200mm

Slot: >0.1mm

Length: <3000mm

Factory floor

I.D: 20mm–350mm

Slot: >0.1mm

Length: <3000mm

Factory floor

I.D: 150mm–1500mm

Slot: >0.1mm

Length: <3000mm

Factory floor

I.D: 150mm–1200mm

Slot: >0.1mm

Length: <3000mm

What is the water well screen pipe?

The location of the water well screen depends on a few factors, including the type of aquifer, the type of well, and the depth of the water table. In some cases, the screen may be located near the surface, while in others it may be located deeper in the earth.

The most common type of water well screen is a gravel-packed well. This type of well typically has a gravel-filled layer at the bottom of the well. The gravel acts as a filter, allowing only clean water to flow through while blocking out sediments and other debris. The gravel-packed well screen is usually located at the bottom of the well, near the aquifer. The screen is typically made from a perforated pipe or other type of material that has small openings to allow water to pass through while blocking sediments from entering.

In conclusion, the water well screen is an important component of a well that allows water to flow into the well while preventing sediment and other debris from entering. The screen is typically located at the bottom of the well, near the aquifer, and is typically made from a perforated pipe or other type of material that has small openings to allow water to pass through while blocking sediments from entering. In some cases, the screen may be located deeper in the earth, depending on the type of aquifer and the depth of the water table. It is important to ensure that the screen is properly installed and maintained to ensure that only clean water is collected and that any sediment or dirt is filtered out.

What are the advantages of the water well screen products produced by our company?

The water well screen products produced by our company offer a number of advantages over traditional screens and filters. The benefits include improved filtration efficiency, enhanced reliability, and cost savings.

1. Improved Filtration Efficiency

Our water well screen products are designed with a unique profile and are manufactured from corrosion-resistant materials. This ensures a superior filtration efficiency compared to traditional screens and filters. The improved efficiency translates into a greater flow rate and less clogging, allowing for a more efficient water extraction process.

2. Enhanced Reliability

Our water well screen products are designed to operate reliably and consistently over long periods of time. This ensures that the water extraction process remains efficient and effective over extended periods of time. The enhanced reliability also means that our screens and filters are less likely to require regular maintenance and repairs, saving time and money.

3. Cost Savings

Our water well screen products offer significant cost savings over traditional screens and filters. Our screens and filters are designed to last longer and require less maintenance than traditional screens and filters, meaning a lower cost of ownership over the long-term. Additionally, our screens and filters are designed to be more efficient, meaning that a smaller-sized filter can be used to achieve the same desired results, resulting in cost savings. Furthermore, our screens and filters are designed to handle a higher flow rate of water, meaning that fewer filters will be needed to achieve the same desired results, resulting in further cost savings.

Overall, our water well screen products offer a number of advantages over traditional screens and filters. The improved filtration efficiency, enhanced reliability, and cost savings make our products an ideal choice for water extraction. With our water well screen products, you can be confident that you will have a reliable, efficient, and cost-effective water extraction process.